S7-200 PTO profile table, please help!

thinhtt

Member
T
Join Date
Feb 2006
Location
Hochiminh
Posts
4
Dear
I have a problem with S7-200 PLC, CPU224.
When I creat a position profile by Position Control Wizard, the data will be stored in Data block (VB0, for example).
During processing I want to change Speed, pulse number or even Acceleration and Deceleration time. But I can not understand how
these parameters are calculated. Can anyone explain the mean of parameters in Data block and the way of calculation.
Thank you very much
 

Similar Topics

C
S71200 pto amplitude
Dar All, I want use conreol a servo drive with s7-1214dc with pto. s7-1214dc PTO amplitude 5V or 24V? Best ragrds
Replies
1
Views
1,810
mk42
M
J
Micrologix 1200 PTO relay debouncing
Hello! First time poster here. I've been in and out of PLC programming for around 10 years now. My current project has me way deeper into...
2
Replies
15
Views
5,684
Ken Roach
Ken Roach
A
PTO Function ML1200
Hello, I have problem using the PTO function. When Use the Frequency output function MOV 2000 PTO:0.OF I have no problem, but when I try to use...
Replies
2
Views
2,072
aravindh.emerick
A
L
Help with getting my AB Ultra 200 to move using step/direction from PTO
Hi, I posted not long ago regarding my setup. I took some recommendations, but I'm stuck good. Sorry if it's lengthy. I have an AB Ultra 200...
2
Replies
28
Views
5,683
JeffKiper
JeffKiper
T
S7-200 PTO: how to change speed anytime
Hi all. I have an application with S7-200 CPU 224 as follow: - I0.0 ON: pulse output at Q0.0 with acceleration to Speed1. - I0.1 ON: change to...
Replies
0
Views
2,282
thinhtt
T
Back
Top Bottom