Replacing Schiele S400 PLC's with WAGO IPC

Celocelava

Member
C
Join Date
Feb 2008
Location
Banja Luka
Posts
1
Hello,

New to this but understand a bit of it. Just have a question about replacing 2 Schiele S400 (one is only for datatrasnmitting and one runs on Eeprom) with a WAGO IPC (which runs the program) and a WAGO device which can transmit the necessary data from the instruments to the main IPC.

Is this technically possible? We have our sources for copying the Eeprom software into the WAGO IPC.

Thanks!

Celo
 

Similar Topics

L
replacing plc 2-20 with plc 2-30
I have a plc @-20 in my factory where i cannot anymore upload the ladder program . . I Have in front of me a plc 2-30 .. Can i replace it ...
Replies
1
Views
102
joseph_e2
J
P
Replacing a PowerFlex 70 with a 525 using Profibus, help please!
After replacing the 70 with the 525, the PLC can read from the drive and recognizes it as online, but no commands are being listened to. PLC is...
Replies
1
Views
556
Profibussin
P
K
Replacing Powerflex 575 devicenet VFD with different VFD
Hello all, It's been a while but have an odd request. Have a customer that has a AB SLC5/05 with a SDN module. On the network are several...
Replies
3
Views
1,171
khekd
K
Lamboom
Replacing the touch screen on a G3 Red Lion HMI
Has anyone ever replaced a touch screen on a legacy Red Lion G3 series HMI?
Replies
12
Views
1,454
Lamboom
Lamboom
Saturn_Europa
Replacing a Compact L32E with a Compact L33ER
I have a processer that stopped functioning L32E. The only spare available is an Compact L33ER. Are these processers compatible? The IO is...
Replies
9
Views
2,222
Ken Roach
Ken Roach
Back
Top Bottom