According Floboss 107's manual, it supplys power output on DO point. But when testing, it can not provide power, need external power to drive external device. Is it important to wiring a good Ground? Does anynoe has experience on Floboss 107, please help!
Doese Floboss 107 DO point have power ouput?
- Thread starter wilsonzhu
- Start date
Similar Topics
I don't have much experience with a FloBoss107, but I was hoping someone could confirm some details for me.
I understand that out of the box a...
I have a Modicon M340 plc/ Magelis HMI and a Floboss that I'm wondering if there is a communication protocol to be able to change the gas...
I am looking to change a PID loop operation on a ROC Floboss 103. The valve is fail open. they need it to fail close now. Do I need to make the...
Hello everybody. This forum helped me many times, is the first time I make a post here. My problem:
I have a floboss 407 (Link to download backup...
I need to be able to retrieve data from an Emerson Floboss 107. I've never done this, and it is probably the only time I'll have to. I could spend...
