JGarman
Member
Is it possible to reuse Danfoss I/O configured with LONWorks in an Allen Bradley Control Logix system using a "Slot Server Module" as a means of accessing the LON Network?
PLC I/O using LONWorks
- Thread starter JGarman
- Start date
Hello JGarman;
Maybe the following Controllogix LON Works master module can help:
http://www.industrialnetworking.com/Category/Sales-Bin/FS-RA-CLX-LON-001;jsessionid=0a0014481f43c42b7bed452646d182e9ad82dd16ba68.e3eTaxiNaN0Te34Pa38Ta38SaN10
Hope this helps,
Daniel Chartier
Maybe the following Controllogix LON Works master module can help:
http://www.industrialnetworking.com/Category/Sales-Bin/FS-RA-CLX-LON-001;jsessionid=0a0014481f43c42b7bed452646d182e9ad82dd16ba68.e3eTaxiNaN0Te34Pa38Ta38SaN10
Hope this helps,
Daniel Chartier
Similar Topics
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Dear all,
I don't know why setup of password became challenging and weird. After setting up the password and try to upload the ladder from the plc...
Dear All,
I need a sample PLC program to count the output pulse of a mass flow meter so that a specific amount of mass (for example 100gm)can be...
