Siemens Logo
- Thread starter matevmk
- Start date
Maj. Toxido
Member
matevmk said:
Big NO
LOGO 12/24 is different to LOGO 230RC.
Regards
Sherwin
I now that. But I have extend module from logo 230RC and I will supply it with 230V on input but I don't now if that module will comunicate with logo 12/24V or it will burn logo 12/24?Maj. Toxido said:
Anyway thanks for your answer.
Regards
Similar Topics
Hi all,
First, thank you for reading the thread. So I had a task as the following:
An up-counter must be programmed as part of a batch-counting...
Hi Lads,
I want to implement a flood prevention system with my domestic water pump.
The intention is to have the water pump cut off on a daily...
We need a Really Simple and Cheap controller that has a display or a Web Interface where we can change some set points.
We were thinking about a...
hello i have LOGO! 12/24RCE and i am looking for a schematics of electronic board. Or if someone know what is the burned component on the photo.
Hi,
I'm no expert in PID regulating so I need some advise.
I have a VFD controlled deepwaterpump that is maintaining the pressure in a closed...
