PV+screensaver..more than 1??

darrenj

Member
D
Join Date
Feb 2005
Location
Ottawa
Posts
1,003
I know how to change the screen saver on the PV+ but i was wondering if it was possible to select one from the PLC program..For example..The client wants the screen saver to reflect the product being run..If there is 2% milk in the machine(The PLC knows what product it is running) then the screen saver will be 2%..if its running skim then the screen saver says Skim....etc etc...

Thanks
 

Similar Topics

C
PlantPax 3.2 P_Intlk but with more than 16 i terlockd
Hello, i need to use P_Intlk and feed the Status interlock OK bit to a P_DOut block. However, there's 17 interlocks for this output. How can I...
Replies
1
Views
108
Ken Moore
Ken Moore
L
CLEAR ALARM LIST REMOTE HMI CMORE EA9/EA5
Hi everyone, recently i worked with a cmore panel and have the question that how can clear alarm list whit remote form,right now only can with...
Replies
0
Views
107
luisrdgz27
L
A
Connect a single quadrature encoder to more than one input device
Hello, friends, I am trying to upgrade a system that uses an Onrom incremental encoder (E6B2-CWZ6C) connected to a Danfoss VFD (FC360), but now...
Replies
4
Views
271
Aure_PLCs
A
A
How to send more than 127 chars through 1734-232ASC?
Hello Friends I have took the sample program from AB webpage and modified, but I can only send 127 chars...
Replies
1
Views
181
Ken Roach
Ken Roach
J
Cmore HMi to ML1400
Hello, I am new here and have been working with PLCs for a few years now. I have been tasked with setting up a Micrologix 1400….. to a Cmore 10...
Replies
10
Views
491
Jmccoy
J
Back
Top Bottom