briancr
Member
HI All
I have just replaced an old Tele TSX17 brick with a SLC5/04. On the bench Rslinx was running at 19200 baud but when I installed the system in the machine it would not communicate at 19200, only 1200. I have scratched what little hair is left but can not get it to run at 19200. Luckily the machine is of the very slow type and is only digital I/O so I can live with it for now.
Any help in getting it to run at 19200 will be appreciated
Brian
OK Very blonde moment. Found it under channel Configuration
Channel 0 - System
Now for that cold beer!!!!!!!!!!!!!!!!!!!!!!
I have just replaced an old Tele TSX17 brick with a SLC5/04. On the bench Rslinx was running at 19200 baud but when I installed the system in the machine it would not communicate at 19200, only 1200. I have scratched what little hair is left but can not get it to run at 19200. Luckily the machine is of the very slow type and is only digital I/O so I can live with it for now.
Any help in getting it to run at 19200 will be appreciated
Brian
OK Very blonde moment. Found it under channel Configuration
Channel 0 - System
Now for that cold beer!!!!!!!!!!!!!!!!!!!!!!
Last edited: