Unidrive SP on profibus

Plc_User

Member
P
Join Date
Dec 2005
Location
Belgium
Posts
317
I am trying to configure an Unidrive SP on profibus connected to S7 300 CPU. I don't succeed to get it started. Does someone have an example of a parameterfile of the drive and the hardwarconfiguration in the plc? Thanks
 
I'm also need to know how i can make a config bet plc 300 CPU 314c-2DP and unidrive sp
if there ara any one do this connection please help me
 

Similar Topics

P
Profibus connector for Unidrive SP
We have Unidrive SP's with a Profibus commnunication card. The card is in slot 3 (lowest slot) because only one card is inserted. We also use the...
Replies
4
Views
3,952
Plc_User
P
panic mode
PanelBuilderPro connection to PLC in Unidrive M700
hello everyone, trying to find a way to read/write memory of the PLC that is inside Unidrive M700 over Ethernet (modbus TCP) using device/server...
Replies
0
Views
559
panic mode
panic mode
busarider29
Download parameters to Unidrive
Greetings experts, We have a 'Control Techniques' Unidrive 3405 in an older machine. It appears that the drive parameters are recorded in a .CTD...
Replies
0
Views
723
busarider29
busarider29
J
Unidrive SP
Hi We intend to replace our LENZE EVS9326 EP with a Control Technique Unidrive SP. The machine is a simple one; PLC send ABZ pulses to the drive...
Replies
3
Views
2,037
Ryan_Ge
R
R
Control techniques Unidrive M700 Modbus address list
Looking for a Modbus address manual for M700. Modbus address is same as the Parameter number for 16Int parameters. But it is different for 32Int...
Replies
2
Views
1,988
Ranjith
R
Back
Top Bottom