Synchlink PowerFlex 700s

magicsmoke

Member
magicsmoke
Join Date
Aug 2007
Location
Minnesota
Posts
110
Has anyone used Synchlink with the powerflex 700s and had any luck using it.

We had a OEM build us this machine were the top drive is suppose to follow the bottom they used Synchlink and they can't get it to work right the top drive jerks alittle bit and we want it to run smooth.
 

Similar Topics

A
Motion, Sercos, Synchlink & Prod/Cons tags
Had a problem recently that we've resolved, but we are trying to decide on alarming and prevention of the massive downtime because of the problem...
Replies
2
Views
1,494
A353322
A
W
Powerflex 525
Fairly new to the drive so apologise for the layman terms. Textile machine uses PF525 VFDs to control motors. The speed of the drive is currently...
Replies
5
Views
118
Wardy89
W
G
Powerflex 40 Firmware update
Hello Everyone, I want to upgrade the firmware of Powerflex 40 from 5.001 to 6.002 can anyone tell me how can I do that?
Replies
0
Views
64
ghulamshoaib
G
A
Communication Issues between PowerFlex 700 and M580 Controller
Hello, I am currently in the final week of my internship and I have encountered issues with communication between a PowerFlex 700 variable...
Replies
8
Views
241
Lare
L
M
DeviceNet-Powerflex 70 VFD
Hi there, I have above mentioned VFD which is communicating to my control logix(L62) plc using devicenet DNB scanner(plc side) and 20-comm-D card...
Replies
3
Views
185
MarvelJoe872
M
Back
Top Bottom