AB 1747-uic help

mcginnis535

Member
mcginnis535
Join Date
Oct 2008
Location
woodville
Posts
7
I did some thing wrong?. My uic was working good
until I used a 1747 pic. Now the auto configure
will not work. The com port is correct (checked in
divice manager)and the baud is 19200.
So what could I have done wrong??



Thanks
McGinnis535
 
mcginnis535 said:
I did some thing wrong?. My uic was working good
until I used a 1747 pic. Now the auto configure
will not work. The com port is correct (checked in
divice manager)and the baud is 19200.
So what could I have done wrong??



Thanks
McGinnis535
Click to expand...

Delete the PIC driver, then shutdown RSLinx then restart.
See PDF below for the UIC configuration.
Note: step 8, do not click on autoconfigure.
 

Similar Topics

P
1747-UIC Help
I need a little help with my 1747-UIC; I tried connecting in to a SLC 5/01 using the C-13 cable and as far as I can tell everything is as it...
Replies
7
Views
3,657
pct_jimmy
P
M
Coms Help RSLinx to 1747-UIC USB
Both hardware and software have be running on this PC. But I had to format my hard drive for other reasons so am re-installing right now and im...
Replies
2
Views
5,137
geniusintraining
geniusintraining
P
1747-UIC Need Help Bad
I need help. I can't get my new 1747-UIC to work. My experience with Allen Bradley products is very limited so please don't take for granted I...
Replies
11
Views
5,016
Philadelphia Frank
P
G
ayuda con interfase 1747 uic
se me desprendieron los cables del cable usb quiero soldarlos pero no se como van los cables si alquien me pudiera proporcionar una foto o como...
Replies
1
Views
401
Mickey
Mickey
S
DH485 and 1747-UIC adaptor---cable question
Hi again, so this new client has a SLC 5/02 with a DH485 port. I have the older white 1747-UIC adaptor, which I have only ever used for the RS232...
Replies
2
Views
1,291
Skidood
S
Back
Top Bottom