analog 0-10v

Hey guys

I have a Analog signal beetwen 0,5-5volt, on 1746-mi4. I have made a SCP.
Input min: 0
Input max: 32767
Scaled min: 0
Scaled max 10

But how do i get the output out in eg. 3,3volt og 4,2 volt. I need the decimal (,)

Simply use a Floating Point as destination OUTPUT of your SCP...

Example:

input I:3.0
in min 0
in max 32767
scaled min 0.0
scaled max 10.0
out F8:0

Hope this helps...

- [FONT=comic sans ms,sans-serif]fuzzy logic[/FONT]

Thanks. Got it