cpu314c-2dp

Hi Friends,
please fast replay if you can answer.
I have 4 cpu314c-2dp and i want connect to Foxboro through FBM223 module by using probibus, note that Foxboro is Master(0) and the address of cpus are slave dp 50,60,70 and 80
so
how can i configure the cpu314c-2dp to foxboro read from it ?
in hardware configuration I mad the dp salve but i need the soft or how configure it?
thank you:book:

Hello Hussein;
Here are 2 links that will show you how to setup a S7-300 CPU as slave to a DP-master.
The first one shows how to set it up for a non-Siemens CPU (in this case an older S5):
http://support.automation.siemens.com/WW/view/en/6518938

The next one shows how to use a S7-300 CPU as slave to a S7-400 CPU.
http://support.automation.siemens.com/WW/view/en/6518822

Using both you should be able top understand how to build the exchange table required for your application and how to define it for the Foxboro Profibus configurator.

Hope this helps,
Daniel Chartier