extention tools(profibus)

hosein

Member

H

Join Date

Jul 2009

Location

tehran

Posts

21

• Jul 16, 2009

• #1

Hello
I have a question about communication plc with profibus.
what tools we have need if we want to have 2 nodes (slaves)
with cpu315-2Dp (master)and we want to use from ET200m (IM s).
Thanks

 

fribeiro

Member

F

Join Date

Dec 2003

Location

Almada

Posts

40

• Jul 16, 2009

• #2

You just need Step7, go in Hardware Configuration of your project and the design your network with this 2 ET200M slaves!

 

hosein

Member

OP

H

Join Date

Jul 2009

Location

tehran

Posts

21

• Jul 19, 2009

• #3

Hi friberio
I want to learn about profibus connector. please introduce a good link to me. Thanks

 

dchartier

Member

D

Join Date

May 2003

Posts

1,546

• Jul 19, 2009

• #4

Hello hosein;
The following link will allow you to download one of the best free ressources on Profibus technology and hardware, including a section on the different connectors provided by Siemens:
http://support.automation.siemens.com/WW/view/en/1971286

Hope this helps,
Daniel Chartier

 

hosein

Member

OP

H

Join Date

Jul 2009

Location

tehran

Posts

21

• Jul 19, 2009

• #5

Thank from your consideration mr. Dchartier please give your ID for chat!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!