Siemens DC drive controlled by S7-300 PLC

justine

Member
J
Join Date
Mar 2009
Location
singapore
Posts
9
I'm a new user for Siemens DC drive and S7-300 PLC.
Now I'm trying to control DC drive with S7 PLC.
The problem that encounter is I don't know how to set the control word and status words( for feedback monitoring)
e.g, I want to set status word 6 for feedback monitoring for armature current.
how can i do setting on PLC side and Drive side?

Any one please advise me.

Regards,
 

Similar Topics

K
Siemens S120 drive to control Lenze servomotor
Kindly, has anyone tried to control Lenze servomotors with Siemens S120 drives ? Any special hints ? Have some concerns for the resolver and servo...
Replies
5
Views
232
L D[AR2P#0.0]
L
A
Siemens drive and Encoder issue
On my machine we have MicroMaster 6SE6400-1PB00-0AA0 running a motor with a Siemens 6FX2001-5QP24 encoder. Everything was working fine and then...
Replies
0
Views
295
Aderaleau
A
H
Siemens Drive G120 IO address
Hi All CPU 1517F-3, Drives G120C Working on a project that is under development, so more IO will be added as we go along, to keep my drives out...
Replies
12
Views
641
Holmux
H
C
Siemens SINAMICS Startdrive V16 HSP
I have G120 with Firmware version V4.7.13. In the TIA project, I have version V4.7.10. I would like to install new firmware HSP in my project. I...
Replies
2
Views
1,857
JRW
JRW
P
Siemens 6RA80 DCM Drive
I have a new Siemens DCM Drive and I need to know how to make it run Forward Only. I can do this if I turn the torque to 0 but I need the negative...
Replies
14
Views
4,237
Manglemender
M
Back
Top Bottom