communication with s7 200 via profibus

tny

Member
tny
Join Date
Jun 2005
Location
usa
Posts
105
hi, we have a device communicating with s7 300 plcs and ofcourse a gsd file.
what should i do to do the same for an s7 200 plc?
is the gsd file useful for s7 200s?
 

Similar Topics

I
S7-400 communication with S7-1200 via put/get NOT with TIA
Good day, everyone, We're trying to establish an S7 connection on ethernet between an S7-400 CPU and a new S7-1200 CPU (which is defined as slave...
Replies
10
Views
2,622
inutz_john
I
H
Kepware and s7-1200 communication via modbus rtu
Hi! I have a S7-1200 1214C with RS232 Communication Module (CM1241) as Modbus Master I found an example of work with MODBUS in here...
Replies
0
Views
4,416
hiddenstar00
H
J
Communication between S7-200 EM277 and Premium PBY100 via Profibus
Siemens register address is VW. Schneider's address is 96IW. How to convert signal between them? Appreciate any comments.
Replies
3
Views
4,008
Jeanne
J
R
Siemens S7-1200 profinet communication with codesys plc
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
2 3
Replies
43
Views
2,859
raghu_k
R
H
Siemens S7-1200 communication with Cognex 2800
Which signals do I have to use to get data from camera. For example camera detects a defect and sends signal to controller. Power cable: CCB-PWRIO-05
Replies
1
Views
213
Puddle
P
Back
Top Bottom