A small question :)

Hello
I'm new with the PLC
so my Question is that I want O/1 to be on when I push I/1
and when I push I/1 again O/1 becomes off.
considering my inputs an normally open switches.

so from the first push of I/1, O/1 on and stays on,when I push
I/1 again O/1 gos off.
I want to know how to do this in a ladder diagram.

Search the forum for "flip flop". The subject has been covered extensively. And, welcome to the forum.

Paul

what have you done in ladder so far to address this problem? Post what you've done so far and we'll try to steer you to something that works. There are unlimited ways to do what you want to do.

thank you very mush

flip flop ladder
i0.0=start button
----[ ]------------------------[difu]10.00

10.00 q5.00
----[ ]-----[/]---------------+ +
+ q5.00 + keep+ q5.00
+----[ ]---------------+ +

simple program ladder


eliskasim
kluang johor