Compact Logix 1769HSC

Gunner

Member
G
Join Date
Sep 2003
Posts
25
Hi All,
Can anyone post a sample code on how to reset a 1769HSC using a Compact logix L35E processor
I have tried to use the soft preset but it does not reset the HSC until it has stopped counting.
I need to reset the HSC on the run.
Rockwell support have been of little assistance
Any help will be greatly appreciated
 

Similar Topics

P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
76
Ken Roach
Ken Roach
M
Compact Guardlogix 5380 to Emerson deltav ok300 communication
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
Replies
0
Views
94
MohamedSK
M
V
What transistor model for blown Compact Logix Output card?
I've blown the Output Transistor on the Output Card of a Compact Logix 1769-L24ER-QBFC1B It says J378. Does anyone know the replacement part...
Replies
3
Views
199
pk_test
P
K
RSLogix Compact Analog Output Control
I am having trouble with getting no control of my analog output signal. I am using the SCL function block to control my analog output. The logic...
Replies
11
Views
243
KI4KKT
K
T
Red lion ICM8 to Allen Bradley compact logix
I was wanting to see if anyone had any information on setting up a cub5 meter and getting the data to a Allen bradley PLC. I think i have the set...
Replies
0
Views
131
Tsmith1823
T
Back
Top Bottom