drives are Movidrive MDX61B
with Either/IP interface cards
with Controllogix talking to the drives.
The DFE33B shows examples using the Generic
Ethernet Module connections, with UDT in the
RSLogix5000 software. All of that is set up
and communicating, but the data is type hex as
the example shows.
I have two questions of anyone who has done this
1. Why use HEX and how do you interpret the data
2. How can you target parameters or parameter groups
Thanks
with Either/IP interface cards
with Controllogix talking to the drives.
The DFE33B shows examples using the Generic
Ethernet Module connections, with UDT in the
RSLogix5000 software. All of that is set up
and communicating, but the data is type hex as
the example shows.
I have two questions of anyone who has done this
1. Why use HEX and how do you interpret the data
2. How can you target parameters or parameter groups
Thanks