gary wheaton
Member
I'm trying to open the BTR/W Setup Screen for pre-existing BTR/W's in Logix5 and getting the warning "no module exist in I/O configuration". I have seen/read the previous thread regarding same instructing me to open the I/O config and edit the chassis properties and add the IFE module; very informative.
Question 1: in the Edit Chassis Properties table I need to specify a 12 slot chassis. How can I differentiate a 1771-A3B from a 1771-A3B1 without seeing the backplane?
Question 2: Is there any easier way to find the I/O channel config Voltage/Current Range and Raw Min/Max settings in a saved program without module config data?
FYI: I've got 33 stand alone PLC5s at 2 refineries requiring analysis. I have the current project files, just not with the module config data. Hopefully I don't have to hump my laptop to all 33...
Question 1: in the Edit Chassis Properties table I need to specify a 12 slot chassis. How can I differentiate a 1771-A3B from a 1771-A3B1 without seeing the backplane?
Question 2: Is there any easier way to find the I/O channel config Voltage/Current Range and Raw Min/Max settings in a saved program without module config data?
FYI: I've got 33 stand alone PLC5s at 2 refineries requiring analysis. I have the current project files, just not with the module config data. Hopefully I don't have to hump my laptop to all 33...