TSX micro access

Hi,


I think the folowing is possible, but I'm not sure.

What driver should I use to access a TSX micro PLC, through a XBTGT HMI ?

In essence I want to use the HMI as a gateway beween the SCADA and the PLC.

Vijeo Citect is connected by ethernet to the XBTGT, and the XBTGT is connected to the TSX micro on the terminal port using Unitelway.

Thanks.

I don't think the XBT will act as a gateway. You could use a TSX-ETZ-510 to put the Micro the network. Just make sure you install the XIP drivers.

I intend to use the "data share" feature of this HMI, the only problem is configuring the Vijeo Citect to talk to the HMI.