View Full Version : Versamax Micro COM1 Cable pinout
May 21st, 2010, 04:43 AM
Iv'e looked high and low, far and wide, but I cant seem to find the cable pinout for a IC200CBL500 RJ45 to DB9 cable for the versamax micro PLC from GE FANUC. Has anyone got this?
May 21st, 2010, 07:14 AM
RJ45 8-pin (8P8C)
May 21st, 2010, 07:29 AM
ok, thanx how does that then connect on the DB9 side?
May 21st, 2010, 07:55 AM
See attached pages 267-268 of the GFK-1645G manual.
May 24th, 2010, 01:05 AM
May 24th, 2010, 07:32 AM
For the latest version of this manual, go to the GEIP Support web site (http://support.ge-ip.com/).
GFK-1645'G' has at least 3 updates as 'J' is available today (http://support.ge-ip.com/support/index?page=docchannel&id=S:DO458).