TISOFT 505 programmimg help required

Hi, I am programming in TISOFT 505 software for TI545 plc ,did any body know how to download the program in the PLC or just we have to online the PLC and directly change in the controller means online changes plz help me on this topic

and can i use add instruction in TISOFT 505 for adding a floating point/Real numbers waiting for your response

Link to manual:
http://www.itech-troon.co.uk/pdf/tisoft6.3.pdf

I do not have the software infront of me right now but I believe you need to preform an upload. Where you would normally download to the PLC and select what you want to download you also have the option to up load from the PLC.

Yes the TI545 supports Floating Point math. On TI's it is called Real instead of Floating Point.

TI505 real numbers

The real number in TI uses 2 words contiguous; you can use it only in special functions programs. You have to add a point after the V number; for example V100. is a real number that uses V100 and V101

any chance I can get the 505WS32.exe from a TI505 file out there?