modicon m340 communication

plc.omar

Member
P
Join Date
Jun 2010
Location
malaysia
Posts
1
im very new to modicon m340, somewhat i got familiar with addressing I/Os. but i have to know about the MODBUS/ETHERNET communication config between pc and plc.



(if u have complete detail about i mention above, mail me at [email protected])
 

Similar Topics

C
Schneider Modicon M340 to Totalflow communication
Hello, I'm having a hard time understanding how to get a Modicon M340 to pull a Modbus address from an ABB Totalflow via Ethernet. I set up a port...
Replies
5
Views
1,151
diat150
D
C
Modicon M340 Readvar Communication Report 7
I've got an M340 hitting an Ethernet to Serial converter one read at a time. Each read is enabled through a one-shot r_trig. I've got some extra...
Replies
2
Views
1,592
Saffa
S
A
Modbuss Communication error between Modicon m340 and altivar 71
Hey Guys, i made a communication between modicon m340 cpu 2020 and altivar 71 through modbus using writevar function as shown in the following...
Replies
1
Views
1,886
damica1
D
M
Communication between contrologix & noc0401 in a m340 modicon plc
Hi everyone, is there anyway to read more than just one generic ethernet module with the same IP address in RSLOGIX5000? i just can read one...
Replies
1
Views
1,233
mike.itlac
M
B
Communication MODICON M340 - Python : Modbus TCP
Hello, For my project I have to read and write coils/registers of Scheider Modicon M340 PLC. To do so, I decided to use a python script based on...
Replies
2
Views
4,853
Phil1986
P
Back
Top Bottom