Magelis -> SLC500 CPU 03 Connection

eeuriel

Member
eeuriel
Join Date
Feb 2009
Location
Jalisco
Posts
10
Hello I want to communicate a HMI with a plc SLC500 (cpu 03).

I have Magelis HMI (P/N: XBTH021010M130).
I have the pinout cable for programming (P/N:XBT-Z915).
I have the pinout cable for communication (P/N:XBT-Z9731).

and I have the software XBTL 1000, but it dosen´t has the protocol DF1 for the communication.

Does anyone knows where can i download the protocol?


Thanks
 

Similar Topics

C
Magelis XBTF and SLC500
Hello, I've recently gotten a Magelis XBTF and a few SLC 5/04 PLCs I've looked around for how to network these together but haven't come up...
Replies
2
Views
3,854
rsdoran
rsdoran
C
Magelis 5330 backlight burned
Hello all. We have a slight problem. Shcneider Magelis back light burned out and now it is very difficult to operate. There seems no spare parts...
Replies
4
Views
115
Lare
L
B
Communication error between TM221 with magelis HMIGTO
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
138
BODUSEYTU
B
1
Magelis HMI not working as intended
Good morning friends. . We are having a problem with one of our machines that have two HMI consoles connected to the same network. They have...
Replies
0
Views
1,136
16000lc
1
EICS
Modicon M238 PLC & Magelis HMI - What software Needed ?
I am looking at a bakery oven that has been dismantled and in storage for unknown time, it was manufactured in 2012 so not that old. my gig is to...
Replies
8
Views
3,654
EICS
EICS
Back
Top Bottom