Thanks for the help. The power supply is right beside the processor and then the end cap. I didn't have any I/O connected. I didn't try to have the key switch in the remote program mode, so I can try that. Here is the end of the log file:
08/26/10 07:19:00 [SUCCESS] Update: Instance = 3, Size = 2045916 byte(s), Chunk Size = 256 byte(s), Major Rev = 17, Minor Rev = 7
08/26/10 07:51:53 [FAILURE] Reset: Error #11007: Service cannot be performed while device is in current state.
GS=0x10, ES=0x2018
08/26/10 07:52:19 [FAILURE] Reset:
08/26/10 07:52:19 [SUCCESS] Update: Instance = 11, Size = 1834808 byte(s), Chunk Size = 256 byte(s), Major Rev = 0, Minor Rev = 0
08/26/10 08:21:43 [FAILURE] Reset: Error #11007: Service cannot be performed while device is in current state.
GS=0x10, ES=0x2018
08/26/10 08:23:36 [FAILURE] Reset:
08/26/10 08:23:38 [SUCCESS] Update: Instance = 65535, Size = 1572864 byte(s), Redundant update bypassed
08/26/10 08:23:38 [FAILURE] Reset: Error #11007: Service cannot be performed while device is in current state.
GS=0x10, ES=0x2018
08/26/10 08:23:42 [FAILURE] Reset:
08/26/10 08:23:45 [FAILURE] Device Identity: Error #11006: Service cannot be performed while object is in current state.
GS=0x0C