sanket_shete
Member
We have OA2-Promas system installed in one of our plant.
The control logic is written in step ladder format at the back end of Promas GUI.
However it is using S7 hardware to control the system (not S7-CPU)& Communication is on Profibus.
I am having very little knowledge about Promas system & now have to do some modifications in system.
Can anyone suggest any manual/link so that i can learn the system programming.
Thanks In Advance
The control logic is written in step ladder format at the back end of Promas GUI.
However it is using S7 hardware to control the system (not S7-CPU)& Communication is on Profibus.
I am having very little knowledge about Promas system & now have to do some modifications in system.
Can anyone suggest any manual/link so that i can learn the system programming.
Thanks In Advance