I am new to plc's. I am in the process of setting up a slc-500 at home for practice. I want to use 1746-ia16 and 1746-oa16 modules. Can anyone tell me the differences between series a,b, and c or is this important for what I'm doing. Thank you for your answers
i/o modules
- Thread starter Kevin B
- Start date
Alan Case
Lifetime Supporting Member
For home use it is not important.
Regards Alan Case
Regards Alan Case
Similar Topics
I have just installed Studio 5000 V30.11 on my Windows 11 Pro machine. First I had an "Invalid Pointer" error that required me to update Factory...
Hi
First post here!
I admit I am not too used to handle interrupt OBs in Siemens.
I have a customer who has been buying a standardized solution...
Hi everybody!
I have 2 Mitsubishi Q series PLCs that have built-in IP addresses of 192.168.3.xx and both of them have Ethernet modules...
I have a Conveyor System Running Balluff Remote Ethernet blocks
Topography has ethernet going through Master-2 to Master-1
(BNI...
Hi All,
I just wanted to confirm something regarding this module. What I understood from the manual, is that if RS-485 mode is selected (jumper...