Redlion G310 to Ero Electronic TKS-mA via Modbus RTU

mjoubert

Member
Join Date
Jun 2007
Location
Pietermaritzburg, South Africa
Posts
192
Hi Guys,

All we want to do is read the SV and PV data from the controller for logging purposes. The unit must run in local mode.

Has anyone managed to get the comms working between these 2 devices?

Any help will be truly appreciated.
 
I have never connected to one of these devices but I will try to help. Do you have any documentation you could forward to me about the controller? Do you know what the port settings are and what protocol it supports?

Thanks
Jeremy
 

Similar Topics

Hi All, I have a RedLion G310 panel which talks to a number of devices via Modbus. The G310 has both RS485 ports installed because one Modbus...
Replies
4
Views
2,955
First Post here. I am an old hand with PLCs but new to the G3 and new to BacNet. I have a RedLion G310 HMI talking to a AB CompactLogix PLC. It...
Replies
1
Views
2,295
Hi all I just upgraded our G306 to a bigger G310 display. The G310 just will not serve a web page to the Internet. I can see it on the LAN...
Replies
2
Views
2,226
Has anyone found a good way to put electrical drawings on a G310? I tried the .pdf viewer, but it is painfully slow. It takes about 10 seconds...
Replies
5
Views
2,419
PLC Info: Modicon AEG M//N: PC-A984-145 S/N: 20033182 Comp 984 CPU 8K MEM 1XMB MB+ HMI Info: REDLION Model G310 PT#: G310C210...
Replies
2
Views
2,859
Back
Top Bottom