isteak007 Member I Join Date May 2009 Location NewYork Posts 216 Nov 22, 2010 #1 Dear Expert, What is the programming cable for Siemens KTP-178 Micro. Thanks
JesperMP Lifetime Supporting Member + Moderator Join Date Feb 2003 Location ᚴᚬᛒᛅᚾᚼᚬᚠᚾ Posts 16,356 Nov 22, 2010 #2 Is that a new panel ? It does not exist on Siemens Mall. If not, then post the entire type number of the panel.
Is that a new panel ? It does not exist on Siemens Mall. If not, then post the entire type number of the panel.
isteak007 Member OP I Join Date May 2009 Location NewYork Posts 216 Nov 22, 2010 #3 JesperMP said: Is that a new panel ? It does not exist on Siemens Mall. If not, then post the entire type number of the panel. Click to expand... The K-TP178 is available for the Asian market only, K-TP178micro 6AV6 640-0DA11-0AX0 Can be programed with WinCCFlexible 2004 SP1. (with Asian language install). http://www.ad.siemens.com.cn/products/as/hmi/panels/micro_panel/K-TP178micro.asp http://www.plctalk.net/qanda/showthread.php?t=54361
JesperMP said: Is that a new panel ? It does not exist on Siemens Mall. If not, then post the entire type number of the panel. Click to expand... The K-TP178 is available for the Asian market only, K-TP178micro 6AV6 640-0DA11-0AX0 Can be programed with WinCCFlexible 2004 SP1. (with Asian language install). http://www.ad.siemens.com.cn/products/as/hmi/panels/micro_panel/K-TP178micro.asp http://www.plctalk.net/qanda/showthread.php?t=54361
JesperMP Lifetime Supporting Member + Moderator Join Date Feb 2003 Location ᚴᚬᛒᛅᚾᚼᚬᚠᚾ Posts 16,356 Nov 22, 2010 #4 I see. It looks like it is aimed at S7-200 and has an RS485 port. My guess is that it needs to be programmed with the PPI cable. But only guessing.
I see. It looks like it is aimed at S7-200 and has an RS485 port. My guess is that it needs to be programmed with the PPI cable. But only guessing.