Hi guys, it’s been a while since I did any projects using a micrologix 1500 controllers, but I remember that there was a feature in RsLogix 500 where I could specify what type of base I'm using for a particular processor. I spent about an hour trying to locate this with no results can anyone help as to where this option is located. Thanks
Micrologix 1500 Base Set up
- Thread starter Adam303
- Start date
Similar Topics
I'm ordering a Micrologix 1500 on eBay for training purposes. Do the Rev and Ser have to match between the processor and base unit? Can't I just...
Problems with a Micrologix 1500 Base? Unexplainable errors? Check Knowledgebase item 490954. Affects base units with date from March 2011 to July...
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Hello, I have a 1764 1500 LSP Series A that keeps failing with DTL_E_FAIL I/O error. Searching around it seems there's a weird issue specifically...
Good Day
i Have Micrologix 1500 LSP, and I want to get data from plc and send it through Modbus RTU slave; I have only ch0 on that plc
I Order...
