HSC address
- Thread starter JimZ1987
- Start date
KalleOlsen
Member
I've never tried it, but I guess it is the value in the snapshot.
In this case I'd try to read ID1000 or PID1000.
Kalle
In this case I'd try to read ID1000 or PID1000.
Kalle
Similar Topics
Hello.
Has anyone ran into an issue with HSC on 2080-LC20. It run a cut off press and every so often after resetting to 0 it does not count...
Hey Everyone,
After reading a lot on this forum and elsewhere I see not many are fond of the 1794-VHSC module. I can see to a degree as I was...
Hi everyone,
this is my first time trying to setup encoder counts and track the traveled distance and speed i am using L27ERM QBFC1B processor...
Good day,
I have a micro 850 with a 2080-MOT-HSC that is being fed by two flowmeters, Schneider Electric using IMT31's as converters. They are...
I'm trying to set up a ring counter - one that transitions from 3599 to 0 (and 0 to 3599 in the reverse direction). My counter insists on...