Red Lion G3 extension cable.

Hi all,
I have to connect an Allen Bradley Micrologix 1500 with a Red Lion G3 that is like 30 feet away from the PLC, using the PLC serial port.
What is the best approach to do it?
Could somebody provide the corresponding cable pinout for the suggested cable?

Thank you!

See link below for Red Lion's cable pin-outs.

http://www.redlion.net/Support/Downloads/DeviceDrivers/G3/AllenBradley.html

Thank you!

Elcan said:

Thank you!

Click to expand...

Your welcome. BTW RS232 is spec'd at 50 ft but I have seen it at 150 ft without issues. ( keep baud rate down if you are going to push it)