How to config SST Modbus module for 1756 in slave mode?

bekrab

Member
B
Join Date
Mar 2011
Location
Thailand
Posts
17
Is there any body know how to config SST-SR4-CLX-RLL(Molex Modbus module) in slave mode for CLX) ?

If we set all of ports to slave,
What is the structure of address in each ports?

Thank in Advance.
 

Similar Topics

L
Prosoft MVI69E-MBTCP - Config help
Hi, We have an application that has a device that goes through a reboot (appears un-graceful) What then happens is the MVI module appears to hang...
Replies
0
Views
75
lostcontrol
L
P
Siemens Scalance SC636-2C NAT config
Hi all, I have some difficulties with programming a NAT config in my Scalance SC636-2C When programming the NAT-table i'm not able to reach my...
Replies
4
Views
198
goghie
G
A
MOMENTUM HIGH SPEED COUNTER WIRING AND SOFTWARE CONFIG
Hello Folks, Has anyone configured a Momentum high speed counter on Unity 13.1. We need the wiring diagram for Momentum High speed counter and...
Replies
0
Views
76
autodepart
A
J
Prosoft MVI69-MCM Config Port
Hi everyone, I’m trying to copy the configuration from one MVI69-MCM to another. I am having no luck establishing serial comms with the device...
Replies
0
Views
87
Josh98
J
G
Powerflex 7000 and 20-comm-er config
I have 3 new PowerFlex 7000 VFD's. Rockwell was out to do some checking before startup. These are part of a larger electrical project. I gave the...
Replies
7
Views
321
Rounder
R
Back
Top Bottom