high speed counter

If a signal can change its state from off to on to off again (or from on to off to on) in less time than a single PLC scan, there is a good chance that the PLC will fail to detect the transition. In that case, the high speed counter module is the tool to deal with the signal.
 

Similar Topics

A
MOMENTUM HIGH SPEED COUNTER WIRING AND SOFTWARE CONFIG
Hello Folks, Has anyone configured a Momentum high speed counter on Unity 13.1. We need the wiring diagram for Momentum High speed counter and...
Replies
0
Views
94
autodepart
A
EICS
1734 -VHSC24 Point I/O High Speed counter wiring
i am bench testing a 1734 -VHSC24 Point I/O High Speed counter module, i cannot find any examples of wiring the outputs from the module. does...
Replies
4
Views
1,484
EICS
EICS
P
Allen Bradley CCW High Speed Counter Accumulation Reset
Hello guys, I have created a program where I count the high speed inputs of a flowmeter and create pulses per second to check the flowrate. Next I...
Replies
5
Views
1,821
psycho1o1
P
D
High Speed Counter to measure Length
Hello to all, I don't have to much experience in the PLC. I'm using the Studio 5000 v32.03 We are trying to measure the length of a product, in...
Replies
3
Views
1,165
I_Automation
I_Automation
L
1734-VHSC24/C High Speed Counter Module – Setting Output Window On-Off Values
Does anyone know how to set the output window on-off values on the fly without having to inhibit the module? I could of sworn when I first started...
Replies
11
Views
2,426
JeremyM
JeremyM
Back
Top Bottom