Ab 1746-hsce to 1746hsce2

bop

Member
bop
Join Date
Jun 2005
Posts
13
Good day to all. Our machine just got broken due to damage HSCE module
There are no available parts for one week. Could i use the HSCE2 allen bradley
Module to replace this and just configure the IO CONFIGURATION.please help me
 
Unfortunately, the 1746-HSCE2 is not a direct swap out replacement for the 1746-HSCE, they're very different in the way used to program the counters, and are also different in features.

See the User Manual of the HSCE2 to understand differences and programming method.

- fuzzy logic
 

Similar Topics

A
1746-HSCE swap
I had a 1746-HSCE go suspected bad. have to swap the card in the morning. Other than dip switch settings is there any configuration to do?
Replies
1
Views
1,025
Ken Roach
Ken Roach
O
1746-HSCE reconfigure
Hi there, I have a machine where was a servo with extra encoder. That encoder had resolution 100ppr/5V. We did replace complet servopack (...
Replies
0
Views
948
Oliver Micka
O
B
1746-HSCE output reference
I have a SLC 5/05 processor and I am trying to reference an output from a High speed counter card to be used elsewhere in the PLC. The output...
Replies
1
Views
1,639
gclshortt
gclshortt
B
1746-HSCE vs 1756-HSC/B
I am upgrading HSC modules and have some questions. I can't attach the manuals for reference as they are too large. 1746-HSCE uses M0:e.1/4 for a...
Replies
0
Views
1,652
bdb1324
B
A
1746-HSCE SLC 5/04 G File
Processor Error Message: G file configuration error.. user program G file size exceeds capacity of the module. I cannot seem to find any data...
Replies
3
Views
2,039
controlconcepts
C
Back
Top Bottom