90-30 PLC status point in Cimplicity 8.1

trippy

Member
T
Join Date
Jul 2011
Location
Sc
Posts
1
I've converted a Cimplicity 4.1 project over to Cimplicity 8.1. Some of my displays in 4.1 contained the 90-30 PLC status but it doesn't function in 8.1. In Cim 4.1 the device ID for the status was $2,0. That doesn't work in 8.1. Any ideas?
 

Similar Topics

C
ControlLogix read force status in plc program
Hi everyone i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Replies
3
Views
236
crawler009
C
B
IO status from protected Siemens PLC
I have a password protected Siemens ET200SP PLC, with 'Permit access with PUT/GET communication from remote partner' option disabled. Is there...
Replies
1
Views
452
mk42
M
Mas01
Siemens S7/TIA v18: PLC On/Off Status LED...
On this project, the operator's asked me to add an LED onto the cabinet of the PLC enclosure, such that the LED illuminates when the PLC's...
Replies
13
Views
1,046
Liam Moran
Liam Moran
timryder
TIA Portal v16 - DB for PLC Status
Looking for a way to export PLC status to Kepware ultimately. In Rockwell we can do a GSV and get a lot of information about the PLC. Is there...
Replies
1
Views
1,567
JesperMP
JesperMP
B
CompactLogix PLC status information on HMI
Hey guys, We are using a compactlogic 5069-L33 with an Panelview in our project. Currently busy with some diagnostics displays of the PLC and...
Replies
4
Views
1,805
b.jansen
B
Back
Top Bottom