mjoubert
Member
Hi,
Please could someone explain how to read (Eg. actual speed) from a 590+ drive on a Redlion HMI or to write (Eg. main setpoint). I have looked through the HA463560 manual for the drive's 485 option card, but am still confused with the register choices presented by the HMI.
Many Thanks
Please could someone explain how to read (Eg. actual speed) from a 590+ drive on a Redlion HMI or to write (Eg. main setpoint). I have looked through the HA463560 manual for the drive's 485 option card, but am still confused with the register choices presented by the HMI.
Many Thanks