WinCC Flexible RT ethernet comm to CPU317 via CP 343-1 problem

Hello,

I am trying to setup an ethernet link between a computer running WinCC Flexible RT (2005) and a CPU317 via CP 343-1.

I believe I have everything setup correctly in my Wincc Flexible project. I think the problem is, when I open the Set PG/PC Interface on the host computer (the one with WinCC Flexible RT installed), I can select S7ONLINE (STEP 7), but I do not have a choice to add a TCP/IP interface.

All I have is:

CP5511 (Plug&Play)
CP5512 (Plug&Play)
CP5611 (Plug&Play)
PC Adapter
PC/PPI cable

Is there a separate drive I must install?

Any help would be appreciated.

WinCC Flex 2005 PC RT is (or was) bundled with Simatic Net IE Lean.
You have to install this to be able to go online via ethernet.

JesperMP said:

WinCC Flex 2005 PC RT is (or was) bundled with Simatic Net IE Lean.
You have to install this to be able to go online via ethernet.

Click to expand...

Hmmm... It did come with another disk, I will have to see if that's on there.

Thanks Jesper

That was probably it. I installed the disk and now see the enet card.

Thanks Jesper