ML1400 + PF40's

robw53

Member
robw53
Join Date
Nov 2009
Location
south yorks
Posts
515
i have a ML1400 connected to a PV+700 and im looking into adding some PF40's with individual 22-comm-E cards, one of them i will be starting it over ethernet, unless this isnt a good/reliable way of controlling with a micrologix, and also the speed reference, the other maybe 3 or 4 inverters will just be controlling the speed ref and maybe reading the current on one of them.

is this possible or will i exceed my connections?

Rob
 

Similar Topics

robw53
ML1400 PF40 Modbus
i have got setup in the shop a 1400 with a 1763-nc01 adpator to allow me to talk MODBUS to the drive. so far i have setup both the drive and 1400...
Replies
6
Views
4,231
robw53
robw53
J
Cmore HMi to ML1400
Hello, I am new here and have been working with PLCs for a few years now. I have been tasked with setting up a Micrologix 1400….. to a Cmore 10...
Replies
10
Views
493
Jmccoy
J
L
ML1400 series C frn21
Hi, We may of finally received out first v21 ML1400. IP address set, proceed to download standard file for our machines & at about the 80% mark...
Replies
10
Views
1,443
Ken Moore
Ken Moore
J
Migration from Allen Bradley ML1500 to ML1400 S:/0 Error
I have a Allen Bradely 1500 that has a cracked board. It still works but needs replaced (battery is no longer connected). To make migration easier...
Replies
10
Views
3,224
OkiePC
OkiePC
0
Multiple HMI with ML1400
Hi, I've got a new project for a vacuum conveying system. We require to add another HMI to the existing system which will then feed 2 separate...
Replies
6
Views
1,829
GaryS
G
Back
Top Bottom