TSX Micro

joigunni

Supporting Member
J
Join Date
Jan 2011
Location
Iceland
Posts
52
I'm wondering if anyone here can tell me how to upgrade firmware in TSX Micro. I have TSX 3710100 v/1.1 and want to upgrade it to v5.1. Do I use PL7, or do I need some other program to do the upgrade?
 
I havent done this on a micro and not even sure if you can do it on a micro. But in your modicon folder there is a os loader. You just need the *.bin file for the new version
 
Check your pl7 installation discs. You get the option when you install to install the os loader extra. So hopefully you can get the os loader installer on the discs
 

Similar Topics

AutomationTechBrian
Modicon TSX Micro- Software, Comm Cable?
After updating a panel, I inherited another PLC for my "learning lab". It's a Modicon TSX Micro. I've not worked with a Modicon PLC yet, so I...
Replies
1
Views
152
tarik1978
T
M
Plc tsx micro 3722
My plc is stx micro 3722 My problem is err led is flashing I tried to re programme my plc with pl7 programme The pl7 tel me cant connect with...
Replies
0
Views
373
Moham
M
M
TSX Micro Operating System
I'm working on a Schneider TSX Micro TSX3722001 with an alternately flashing ERR and TER led. The machine has been idle for about 3 years and I...
Replies
2
Views
1,000
Iner
I
B
Modicon TSX micro bit sum query
Pure mind boggled at this one, can’t seem to figure it out. NO contact with - %M130(%MW11) How is this possible? Is the %MW11 0 it’s logic 0, 1...
Replies
5
Views
1,546
Baptie
B
M
modicon TSX 3722 micro cable
Hi All, i have PLC Modicon TSX 3722 Micro i need to know where should i put the socket of programming cable on Ter or Aux port. and i see the file...
Replies
0
Views
1,642
mouhab_ah
M
Back
Top Bottom