Jayden
Member
Hi all,
I wish to setup a remote connection to connect Citect Scada to a mirologix 1500 processor. My current idea was to have a 3G router (prob from Digi) at the plc end. For Citect communications I plan to use the Abrslinx driver to utilize the Rslinx connection to the plc. This way I can do programming support whilst also running Citect. I Have arranged static IP already for the router.
Is this the best approach to take?
Also my client is very Particular about having seamless data trends. Is there any data logging feature in the Micrologix 1500 that can be accessed by
Citect ?
Would love some advise on this.
Cheers
I wish to setup a remote connection to connect Citect Scada to a mirologix 1500 processor. My current idea was to have a 3G router (prob from Digi) at the plc end. For Citect communications I plan to use the Abrslinx driver to utilize the Rslinx connection to the plc. This way I can do programming support whilst also running Citect. I Have arranged static IP already for the router.
Is this the best approach to take?
Also my client is very Particular about having seamless data trends. Is there any data logging feature in the Micrologix 1500 that can be accessed by
Citect ?
Would love some advise on this.
Cheers