Greetings. I am new to VBA and I have a task. Transfer OPC Server data displayed by the HMI using FactoryTalk Veiw SE to a PLC tag. I did the trick by creating a button to run the following command:
[OPC Server.Tag] = [PLC].Tag
The only problem is that this does not run continuously. I don’t know how to write a VBA code to do this continuously or if there is any other function on FTV SE to do this.
Any help is appreciated.
Thank You
[OPC Server.Tag] = [PLC].Tag
The only problem is that this does not run continuously. I don’t know how to write a VBA code to do this continuously or if there is any other function on FTV SE to do this.
Any help is appreciated.
Thank You