sorry, may i know what is "rslogic","micrologic"?
- Thread starter REZAR
- Start date
Eric Nelson
Lifetime Supporting Member + Moderator
Eric Nelson
Lifetime Supporting Member + Moderator
Sleep? What's that?... 
Actually, there are not many humans here. As would most PLC guys, Phil has fully automated this forum. My previous response was just a 'canned' message triggered by specific keywords you used.
Phil gave use human user names just to make it seem more friendly.
There is a simple way to determine if a response is from a 'human' or 'posting robot':
-Eric (AKA posting 'bot #723639)
Actually, there are not many humans here. As would most PLC guys, Phil has fully automated this forum. My previous response was just a 'canned' message triggered by specific keywords you used.
Phil gave use human user names just to make it seem more friendly.
There is a simple way to determine if a response is from a 'human' or 'posting robot':
- Post counts > 500 are NOT humans. Humans are simply incapable of posting that much.
-Eric (AKA posting 'bot #723639)
Eric Nelson
Lifetime Supporting Member + Moderator
All of the above!...
beerchug
-Eric
beerchug
-Eric
Rick Densing
Member
I like your trick- you keep posting from TOMORROW!
kalle
Member
Get a life...
Every morning I have checked this url, I see Eric ONLINE....
even if there must be 6-7 hours difference in the timesone.
Your post's in this thread today, Eric:
Today 01:57 AM
Today 03:52 AM
Today 07:48 AM
And in another thread: Today 09:52 AM
(all times GMT +1)
I think you need to change your avatar:
[attachment]
Go out and play with your kids!
Every morning I have checked this url, I see Eric ONLINE....
even if there must be 6-7 hours difference in the timesone.
Your post's in this thread today, Eric:
Today 01:57 AM
Today 03:52 AM
Today 07:48 AM
And in another thread: Today 09:52 AM
(all times GMT +1)
I think you need to change your avatar:
[attachment]
Go out and play with your kids!
Last edited:
kalle
Member
But your existing avatar
fits this image...
Ron Beaufort
Lifetime Supporting Member
speaking of avatars ... kalle, whatever you're taking, man ...
you need to cut back on the dosage ...
[attachment]
Hagar the Horrible wasn't as bad as this ...
you need to cut back on the dosage ...
[attachment]
Hagar the Horrible wasn't as bad as this ...
PLucas
Member
Ron Beaufort said:
Ron,
That might be UP the dosage!
we don't know what he looked like BEFORE the 'make over'!
Paul
Steve Bailey
Lifetime Supporting Member + Moderator
As I recall, Kalle's avatar from before the makeover looked a lot like Hagar the Horrible.
His current avatar is taken from the Association of Norwegian Reconstructive & Cosmetic Surgeons. It's the 'After' photo from their promotional materials.
His current avatar is taken from the Association of Norwegian Reconstructive & Cosmetic Surgeons. It's the 'After' photo from their promotional materials.
Bitmore
Member
Kalle most likely moonlights as an actor for the Quiznos commercial, sorry for those unfortunates that have no idea what I'm talking about.
Bitmore
Bitmore
kalle
Member
Ron Beaufort said:
Before I end up like this....
Similar Topics
I work in a field where our plc and hmi are constantly being powered fully off and on daily before being sent out. I am new to the world of plc...
Hi there,
PLC in question: 240VAC Omron CP1E-NA20DR-A
Features: 12 inputs – 2 of which analogue, 8 outputs – 1 of which analogue
My question is...
Hi all, there used to be a dos program that I had that had exercises for I think a conveyor, a Silo, some doors and some traffic lights.
I can't...
gedday guys,
quick and easy question (that i couldnt find by googling it. sigh)
I have an allen bradely slc 5/03 processor on a 1746 -a7 back...
Guy's
First let me say i am very sorry to have to ask this but does anyone have a pcis manual?
Point me to a download?
I have been looking...