The information you have provided is pretty scant.
All I can tell you is that it looks like a ControlLogix/CompactLogix Local I/O Digital Address. In this Case Point 2 on an Input Card in Slot 7 of the Local Rack.
It will either make an Object Visible or Invisible, depending on how the Animation is setup, but you have cut most of that off on your picture.
If you are referring to the CBHawk1 Reference, this is a Named Path to the PLC, which should be setup under Nodes. That is where RSView32 does it. I don't have FactoryTalk View here, but it will be the same or very similar.