abhilashponoli
Member
- Join Date
- Jan 2004
- Posts
- 22
I have a GE 90-30 PLC with a communication co processor module(CMM311) installed in it.Is it possible to connect(and see registers) the PC with PLC through the 25pin port of CMM module?I was not able to establish a connection between PLC an PC using this CMM module.
I am using VersaPro.All the serial port settings are mathcing.
Is there any free third party software with which I can read the register contents in a PC connected directly to this CMM module?
I am using VersaPro.All the serial port settings are mathcing.
Is there any free third party software with which I can read the register contents in a PC connected directly to this CMM module?