Hi guys,
I have a newbie question about a mitsubishi instruction in a program.
CMP K2M170 K2M180 M150.
So im not really sure how the comparison is done. Compare 2 nibbles starting from M170 with 2 nibles starting from M180 or compare 2 bits starting from M170 with 2 bits starting from 180?
I understand the part where if the value 1 < value 2 => M150 turns on
if val 1 = val 2 M151 turns on, etc.
Thank you
Micky
I have a newbie question about a mitsubishi instruction in a program.
CMP K2M170 K2M180 M150.
So im not really sure how the comparison is done. Compare 2 nibbles starting from M170 with 2 nibles starting from M180 or compare 2 bits starting from M170 with 2 bits starting from 180?
I understand the part where if the value 1 < value 2 => M150 turns on
if val 1 = val 2 M151 turns on, etc.
Thank you
Micky