ajay34 Member A Join Date May 2010 Location klang Posts 249 Jun 17, 2013 #1 dear all... i would to know..does omron c200he plc..can be support by etthernet.. i wanna commnicate omron plc with wincc but using ethernet support instead of com 1 or 2
dear all... i would to know..does omron c200he plc..can be support by etthernet.. i wanna commnicate omron plc with wincc but using ethernet support instead of com 1 or 2
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,554 Jun 18, 2013 #2 Not that I am aware of. It is really getting pretty old. Replace with CS1 and Ethernet is available. I/O cards will generally work with CS1 so only have to replace CPU and rack. Power supply is probably OK too.
Not that I am aware of. It is really getting pretty old. Replace with CS1 and Ethernet is available. I/O cards will generally work with CS1 so only have to replace CPU and rack. Power supply is probably OK too.
JordanCClark Lifetime Supporting Member Join Date Mar 2007 Location Michigan Posts 610 Jun 18, 2013 #3 BobB is completely correct. Ethernet support was not available until the CS1 came out.
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Jun 18, 2013 #4 Not to be difficult, but that is not entirely true. See attachment. However, this option is no longer available from Omron. I would agree with the CS1 upgrade and a CS1W-ETN21 module.
Not to be difficult, but that is not entirely true. See attachment. However, this option is no longer available from Omron. I would agree with the CS1 upgrade and a CS1W-ETN21 module.
JordanCClark Lifetime Supporting Member Join Date Mar 2007 Location Michigan Posts 610 Jun 18, 2013 #5 Ok, perhaps I should have said native (not to mention reliable) support. Did try one one of those PCMCIA modules. I could never keep it reliably going...
Ok, perhaps I should have said native (not to mention reliable) support. Did try one one of those PCMCIA modules. I could never keep it reliably going...
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Jun 18, 2013 #6 No argument there! Just thought everyone would like a trip back in time.
BobB Lifetime Supporting Member Join Date Jun 2002 Location Sydney Posts 4,554 Jun 18, 2013 #7 I had forgotten that horrible old tiger! Should say scorpion, it certainly had a sting in it's tail.