Citect SCADA - Configure different Modbus driver polling rates

kpdesheeb

Member
K
Join Date
Aug 2013
Location
*******
Posts
2
I have to connect more than 50 no of modbus TCP/IP IO devices to Citect SCADA. I will be connecting them as individual ports. Can I give different polling rate for each of them in using citect.ini file? Or by any other means?
 

Similar Topics

P
Citect Aveva Plant SCADA - Display a variable from cicode on graphics page
I am trying to display a variable within a cicode function onto a graphics page. This function queries a SQL database. I can get the value onto a...
Replies
3
Views
287
LegacyLee
L
P
Citect SCADA (Aveva Plant SCADA) IO Device Setup with Omron NX/NS over Ethernet/IP
We are trying to set up a newer generation Omron PLC (NX/NS Series) with Citect / Aveva Plant SCADA using the Ethernet/IP CIP Protocol to read...
Replies
2
Views
357
plcplcplcplc
P
I
Citect SCADA ver 7.5 with Kingfisher RTU
I am new to Citect SCADA and I am building the graphics for a page that will contain the control of a plant by a Kingfisher RTU. The project I...
Replies
0
Views
265
integration
I
X
Aveva Plant SCADA 2020 (Citect) communicate with Omron CJ2M using OMFINS3
Hi All, I aim to use Aveva Plant SCADA 2020 to read and write data from/to Omron CJ2M CPU35 PLC using OMFINS protocol. However I have Bad Data...
Replies
1
Views
727
plcplcplcplc
P
R
Citect SCADA 7.2 Indirect Tag Reference
Hey, I'm trying to do the following, I have some experience with Citect but can't seem to figure this out. I/O Tag: BoxPos1_ProdNum (Data Type...
Replies
0
Views
578
RayDell
R
Back
Top Bottom