PCS7 Engineering station VM ware clone comms problem

Krcedinac

Member
Krcedinac
Join Date
Jul 2006
Location
Krca
Posts
163
Hello to all,

I converted ES to VM ware workstation virtual machine via VM ware convertor. Adjusted all necessary parameters like new IE General settings etc.
Communication between AS and CFC works but WinCC runtime does not communicate to AS. Compiled many times tried everything I know but without results.

Version of PCS7 is v7.0 + SP1.

What can be the reason?
 

Similar Topics

A
MODBUS MASTER/SLAVE PCS7 9.1 SP1
Does anyone have an example project of the cm ptp ET200 SP HA with 410-5H DCS (PCs7 9.1 SP1) for MODBUS MASTER/SLAVE communication ?
Replies
2
Views
128
Arun Kumar Yadav
A
F
TIA Portal installation with PCS7
Hello, Is there a sequence when installing both TIA Portal and PCS7 in the same PC? First TIA and then PCS7 or viceversa? Thanks in advance.
Replies
0
Views
484
Facu2998
F
F
Project PCS7 Alarms in TIA portal
Hello, I'm currently working on a project involving both PCS7 (v9.1 sp2 upd1) and a Panel Comfort system. This necessitates the use of TIA Portal...
Replies
2
Views
799
Facu2998
F
R
Brand New to the PCS7 Block World: Tank level control
I'm coming from a background of PLC ladderlogic/rockwell products. I am new to blocks. Can you point me in right right direction? What I would...
Replies
5
Views
1,558
Peter Nachtwey
Peter Nachtwey
H
PCS7 V8.2 Reading actual day
Hello everyone, i would like to read in pcs7 v8.2 the actual day of the month(ex 1 or 25 of the month) i used as attached read_CLK AND DT_DATE but...
Replies
4
Views
1,934
Ken Moore
Ken Moore
Back
Top Bottom