110 VAC power line filters

James Mcquade · Sep 27, 2013

Hi all,

i am working on a project in which i need line filters on the 110 side of the controls.

my search for line filters gave a wide range of topics but with no real luck.

my temperature range is maxes out at around 140 inside the panels.

the standard one i use doesn't reach that temperature.

what brands do you use / who would you recommend?

thanks in advance.
james

Tom Jenkins · Sep 27, 2013

I've used Cutler Hammer units. They are also handled by AutomationDirect.com

adisharr · Sep 27, 2013

Another vote for the Cutler Hammer units. They seem to work fine.

RDS · Sep 27, 2013

+1 for Cutler Hammer but they don't meet your temp spec. Try http://www.cor.com/Series/PowerLine/VW/
Over 40C there is a derating formula...

Mickey · Sep 27, 2013

Islatrol has worked well for me.

http://www.alliedelec.com/catalog/catalogpages/201112/857.PDF

Bullzi · Sep 27, 2013

I have used Transtector in the past. The DR series is DIN Rail mounted and is rated to 85 deg. C.

Edit: The model I have uses is the I2R ICP. They are good to to 80 Deg. C.

dploof23 · Sep 27, 2013

Mickey said:
Islatrol has worked well for me.

http://www.alliedelec.com/catalog/catalogpages/201112/857.PDF

I agree, also I believe Phoenix Contact would have something to fit the bill.

110 VAC power line filters

James Mcquade

Member

Tom Jenkins

Lifetime Supporting Member

adisharr

Member

RDS

Member

Mickey

Lifetime Supporting Member

Bullzi

Lifetime Supporting Member

dploof23

Member

Similar Topics